Y.F.M Titanium Micro Needle Derma Roller Acne Treatment Whitening Anti Wrinkles Scars Skin Care
Descriptipn:
Item Type: Skin Roller
Brand: Y.F.M
Needle Size for Choose: 0.3mm, 0.5mm, 1.0mm, 1.5mm
Wheel Width: About 2.4cm
Needles: 540 Pieces
Skin Type: All Skin Types
Material: PC
Color: Silver
Weight: About 35g
Package Included:
1 x Microneedle Roller
Needle Length:
Different needle length is for different purpose.
Choosing a right needle length for your treatment is the most important point when you buy it.
Clean the roller:
1. Wash thoroughly your dermaroller unit, with water and soap.
2. Brush away any residual debris after using it.
3. Then soak about 5-8 minutes with 90% alcohol, or use ultraviolet to disinfect for about 45 minutes.
4. You can also use a cold sterilizer like Clorexhidine solution.
5. Do not use chlorine, autoclaves, steam and high temperature sterilization methods.
Cautions:
1) Do not share the unit with other people.
2) Do not roll too much more than indicated time.
If skin shows hypersensitive response, consult with your doctor.
3) Keep the micro needle part always clean and dry.
4) Store in a safe place out of the reach of children.
5) Due to different producing batches, product details might be a little different.
Item Type: Skin Roller
Brand: Y.F.M
Needle Size for Choose: 0.3mm, 0.5mm, 1.0mm, 1.5mm
Wheel Width: About 2.4cm
Needles: 540 Pieces
Skin Type: All Skin Types
Material: PC
Color: Silver
Weight: About 35g
Package Included:
1 x Microneedle Roller
Needle Length:
Different needle length is for different purpose.
Choosing a right needle length for your treatment is the most important point when you buy it.
| Needle Length | 0.3mm | 0.5mm | 1.0mm | 1.5mm |
|
Hair regeneration, Regrowth |
√ | √ | ||
| Skin Whitening | √ | |||
| Beauty products conduction | √ | |||
| Fine Lines | √ | √ | ||
|
Anti Wrinkles, Large Pores |
√ | √ | ||
| Pigmentation | √ | √ | ||
| Acne Scars | √ | √ | ||
| Sun-Damaged Spots | √ | √ | ||
| Stretch Marks | √ | √ | ||
| Cellulite | √ | √ | ||
| Deep Scars | √ |
Clean the roller:
1. Wash thoroughly your dermaroller unit, with water and soap.
2. Brush away any residual debris after using it.
3. Then soak about 5-8 minutes with 90% alcohol, or use ultraviolet to disinfect for about 45 minutes.
4. You can also use a cold sterilizer like Clorexhidine solution.
5. Do not use chlorine, autoclaves, steam and high temperature sterilization methods.
Cautions:
1) Do not share the unit with other people.
2) Do not roll too much more than indicated time.
If skin shows hypersensitive response, consult with your doctor.
3) Keep the micro needle part always clean and dry.
4) Store in a safe place out of the reach of children.
5) Due to different producing batches, product details might be a little different.