Matek Systems F411-WSE STM32F411CEU6 Flight Controller Built-in OSD 2-6S FC for RC Airplane Fixed Wing
Matek Systems F411-WSE STM32F411CEU6 Flight Controller Built-in OSD for RC Airplane Fixed Wing
FC Firmware
PDB
BEC Vx output
BEC 3.3V output
Physical
Description:
Brand name: Matek
Brand name: Matek
IMU: MPU6000 (SPI)
OSD: AT7456E (SPI)
2x Uarts
2x Motors, 4x Servos outputs
4x ADC (VBAT, Current, RSSI, AirSpeed)
Switchable Dual Camera Inputs
WS2812 Led control : Yes
RSSI: Yes
FC Firmware
PDB
2x ESC power pads
Current Senor: 78A, 3.3V ADC, Scale 423
Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
BEC Vx output
Voltage adjustable, 5V Default, 6V option
BEC 3.3V output
Linear Regulator
Physical
Dimensions: 28 x 28 x 14 mm
| INAV MATEKF411SE | Airplane | Flying Wing | Multi-Rotor |
| S1 | Motor-1 | Motor-1 | Motor-1 |
| S2 | Motor-2 | Motor-2 | Motor-2 |
| S3 | Servo | Servo | Motor-3 |
| S4 | Servo | Servo | Motor-4 |
| S5 | Servo | Servo | Motor-5 |
| S6 | Servo | Servo | Servo |
–
| Magnetometer | I2C (SDA, SCL) | HMC5883 /MAG3110 /QMC5883 /IST8310 | |
| OLED | I2C (SDA, SCL) | 0.96″ 128*64 | |
| AirSpeed Pitot | I2C (SDA, SCL) | Digital Pitot_MS4525 | |
| AirSpeed Pitot | AirS pad | Analog AirSpeed sensor | |
–
| SBUS | Sbus pad | Built-in inverter on UART2-RX | |
| GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
| Frsky Smartport | ST2 pad | Softserial-TX2 is enabled on TX2 pad by default | |
| VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default | |
–
| FPort | UART2 (TX2) | Need non-inverted Smartport signal(hacked) | |
| GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
| VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default | |
–
| PPM | RX2 Pad | Disable Serial RX on UART2 | |
| GPS | UART1 (Tx1 Rx1) | ||