Holybro Kakute F7 V1.5 Flight Controller+Atlatl HV V2 5.8G Transmitter+Tekko32 F3 4in1 40A ESC for RC Drone
Holybro Kakute F7 V1.5 Flight Controller+Atlatl HV V2 5.8G FPV Transmitter+Tekko32 F3 4in1 40A ESC
Tekko32 F3 4in1 40A ESC
Package included:
1x Kakute F7 V1.5
1 x Atlatl HV V2 5.8G FPV Video Transmitter
1x Tekko32 F3 4in1 40A ESC
1x Screw&Parts Package
Kakute F7 V1.5
⢠MCU: STM32F745 32-bit processor
⢠Barometer: BMP280
⢠USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
⢠All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on
⢠Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not
⢠TF card for Blackbox logging
⢠Mounting Holes: Standard 30.5mm square to center of holes
Specifications
⢠Audio: 6.5 MHz Mono
⢠Input Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts
⢠Mounting Holes: Standard 30.5mm square to center of holes
Features:
⢠Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
SmartAudio is not used.
antenna changes. No more ripped-off UFL connectors.
glancing at the quad.
to 800 mW for freestyle.
out of the air.
fly.
stack.
Tekko32 F3 4in1 40A ESC
New BLHELI32 ESC with F3 MCU, give more smooth control and faster
Features:
⢠Supports 3-6S lipo input
⢠Voltage output (VBAT)
⢠Supports oneshot / Multishot / Dshot PWM
⢠Supports damped light
⢠Extra Cap needed for high current or 6s usage
⢠Weight: 11.6g
Package included:
1x Kakute F7 V1.5
1 x Atlatl HV V2 5.8G FPV Video Transmitter
1x Tekko32 F3 4in1 40A ESC
1x Screw&Parts Package