Holybro Kakute F7 HDV Flight Controller Tekko32 F3 HDV 40A 3-6S Blheli_32 4 In 1 Brushless ESC
Overview
Specifications:
Features:
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the
both signal and power.
responding speed. Supports up to 55A burst and 40A continued.
Specifications:
| Kakute F7 HDV Flight Controller |
IMU:PMU6000
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not
TF card for Blackbox logging
Mounting Holes: Standard 30.5mm square to center of holes
|
| Tekko32 F3 HDV 40A ESC |
Supports 3-6S lipo input
Voltage output (VBAT)
Supports oneshot / Multishot / Dshot PWM
Supports damped light
Extra Cap needed for high current or 6s usage
Weight: 11.6g
|
Features:
• Supports Betaflight, Butterflight, and Cleanflight.
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external
• Dedicated bootloader button for easy firmware flashing.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+†pad
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the
• Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V
to 2A to DJI FPV VTx.